DVE - Multivariable Insertion Design Vortex Flowmeter

This question is to prevent automated spam submissions.
8 + 11 =
Solve this simple math problem and enter the result. E.g. for 1+3, enter 4.
Product Specifications
Process ConnectionANSI, DIN Wafer Flange or Threaded via Compression Fitting
Line Sizes DN80...DN600, (3"...24")
Wetted Materials 316L St. Steel
Input Power 12-36 VDC (2 & 4 Wire), 85-240 VAC 50/60 Hz
DisplayAlphanumeric 2 Line x 16 Character LCD
Product Features
Fully Welded Sensor
Optional Integrated Temperature and Pressure Sensor
Field Configurable Range, Outputs and Display
HART® Protocol, Modbus
High Temperature Version to 400 °C
High Pressure Version to 1450 PSIG (100 Bar)

Heinrichs DVE Series multivariable insertion design vortex flowmeters from KOBOLD Instruments use up to three primary sensing elements for flow measurement: 1.) a vortex-shedding velocity sensor, 2.) an RTD temperature sensor, and 3.) a solid-state pressure transducer to measure the mass flow rate of gases, liquids and steam. Systems that use external process measurements may not provide adequate compensation for process conditions that can change radically between the point of velocity measurement and the point where upstream or downstream pressure and temperature measurements are being made. Because the flowmeter measures all of these parameters in a single location, it delivers a more accurate process measurement. Integrating multivariable output capability with a single line penetration also simplifies system complexity and helps reduce initial equipment cost, installation cost and overall maintenance costs. Three models are available: The DVE-V vortex flowmeter provides a cost-effective volumetric flow monitoring solution for most liquids; the DVE-T vortex flowmeter incorporates temperature sensing to provide a compensated mass flow reading of saturated steam; and the DVE-P multivariable vortex flowmeter delivers mass flow, temperature, pressure and density readings from a single device.

Share this:
Other Members of the KOBOLD Group:Henschen, Unirota, Heinrichs, MesUra Henschen GmbH KOBOLD Unirota Kft. Heinrichs KOBOLD Group MesUra KOBOLD Messring GmbH
Find Us Online:FacebookLinkedInYouTube Google+