Flow Measurement without Moving Parts
| Measuring ranges | 0.29-26.4 to 431.6-43,333 GPM Water |
| Process Connections | ANSI CL150/300, 1/2" -24", DIN Flange, DN15-DN600 |
| Material | Hard rubber, Soft rubber or PTFE-lined flow tube, SS/Hastelloy C/Tantalum/Platinum Electrodes |
| Max. pressure | Per flange rating |
| Max.temperature | 176°F/302°F |
| Accuracy | ± 0.3% of reading, ± 0.01% x Qmax |
| Output | Pulse/analog output, digital rate display, totalizer |
| Measuring Ranges | 0.02-5 GPM to 0.6-160 GPM |
| Accuracy | ±1.5 % of F.S. |
| Connections | ½" to 3" NPT or G (BSPP) |
| Material | Brass or 1.4408 Stainless Steel |
| Maximum Temperature | 248°F |
| Maximum Pressure | 230 PSIG |
| Turndown Ratio | 250 to 1 |
| Outputs | Analog, Frequency, Switching, Compact Electronics w/ Digital Displays, Batching and Totalizing Electronics |
| Available Pipe Sizes | ½” to 8” ANSI Flanges, DN 15 to DN 200 Flanges |
| Wetted Materials | Housing/bluff body/flanges - 1.4404 / 316L St. Steel (standard) |
| Input Power | 12-36 VDC (2 & 4 wire), 85-240 VAC 50/60 Hz |
| Optional Display | Alphanumeric 2 line x 16 character LCD |
| Range | 0.13-1.2 GPM to 2.7-26 GPM |
| Fittings | ¼" to 1" NPT & G-¼" to G-1" |
| Fitting Material | Ni-Plated Brass, SS |
| Max. pressure | 145 PSIG/290 PSIG |
| Max. temperature | 176°F |
| Accuracy | ±2.5% of full scale |
| Sensor and Electronic separate Switching range | 0.2-6.6 ft/s |
| Fitting | 1/4" NPT...1-1/2" NPT |
| Material | brass, SS |
| Max. pressure | 1450 PSI |
| Max. temperature | 176 (250) °F |
| Repeatability | approx. 2 % |
| Relays for flow and temperature |
| Switching range | 0.16-6.6 ft/s |
| Fitting | 1/4" NPT, 3/4" NPT, 1-1/2" Tri-Clamp |
| Material | 304 SS, 316-Ti SS |
| Max. pressure | 1450 PSIG |
| max. temperature | 250°F |
| Repeatability | approx. 1% |
| LED-chain, relay, analog output |
| Switching range | 0.15 to 6.6 ft/sec |
| Fitting | ¼" NPT, ½" NPT, M12 x 1, 1/4" bsp, 1/2" bsp |
| Material | SS |
| Pmax | 580 PSIG |
| Tmax | 176°F (250°F CIP) |
| Repeatability | +/- 2 % |
| LCD-display, switching output |
| Switching range | 0.2 - 6.6 ft/s |
| Fitting | , 1/4", 1/2" or 3/4" NPT male, 1-1/2" TriClamp |
| Wetted Material | 304 or 316 stainless steel |
| Max. pressure | 1450 PSIG |
| Max. temperature | 250 °F |
| Repeatability | aprox 3 % |
| LED-chain, relays, analog output |
| Measuring range | 1 m/s - 20 m/s air |
| Fitting | ½" NPT, Optional Flange |
| Material | Nickel-Plated Brass |
| Max. pressure | 120 PSIG |
| Max. temperature | 250°F |
| Switching accuracy | +/-10% of meas. value. |
| Measuring Range | 0.1-0.5 to 400-2000 GPM |
| Fittings | 1/2" - 1-1/2" NPT, 1/2" - 8 " ANSI |
| Material | Brass or SS |
| Accuracy | ±5% FS |
| Operating Temperature | standard; -4 to +250°F w/ switches; -4 to +200°F |
| Max. Pressure | 230 PSIG |
| Measuring Ranges | 0-10 SCCM to 0-500 SLPM |
| Fittings | ¼"NPT, ½"NPT, Swagelok® ¼"- ½" |
| Body Material | Nylon; Aluminum, SS |
| Max. Pressure | 100 PSIG (Nylon, Aluminum), 500 PSIG (SS) |
| Max. Media Temperature | 120°F |
| Accuracy | ±1.5% F.S. at 15-25°C & 5-60 PSIA |
| Input Power | 12 VDC Standard, 24 VDC Optional |
| Output Signal (Linear) | 0-5 VDC Standard, 4-20 mA Optional |
| Available Ranges | 0.18-7.8 GPH through 9-180 GPM water |
| Accuracy | ±2.0% of full scale |
| Repeatability | ±1% of full scale Oper. Temp. Range |
| Maximum Pressure | 145 PSIG @ 70°F |
| Max. Pressure Drop | 3.6 PSI @ 100% rated flow |
| Wetted Materials | PPS/SS/Buna-N, PPS/SS/FKM, PVDF/Hast®.C/FFKM, PVDF/Tantalum/FFKM |
| Line Sizes | 6" through 72" |
| Accuracy | ±1.5% of reading ±0.5% of adjusted span at reference conditions |
| Fittings | Insertion weld sleeve with 2" 150 LB ANSI or 50 mm DIN instrument flange |
| Adjustable Span | From 3.3-33 Ft/Sec. |
| Measuring range | 1-5 m/s (Liquids) Weldable connection sleeves 1" - 12" |
| Material | SS |
| Max. pressure | 230 PSIG @ 75°F |
| Max.temperature | 212°F |
| Accuracy | ± 2 % of measured value |
| Output | relays, analog output |
| Measuring -/switching range | 0.15-1 to 85-600 GPM water 2.5-25 to 300-1700 SCFM air |
| Fitting | 1/2"-3" NPT |
| Material | bronze, SS |
| Max. pressure | 580 PSIG |
| Max. temperature | 176°F/212°F |
| Accuracy | ± 3 % FS |
| Mech. pointer indicator, analog output, Digital display, contacts |
| Accuracy | ± 3% Full Scale |
| Measuring Ranges | |
| Liquids | 0.5-4 GPH to 400-3000 GPM |
| Gases | 5-40 SCFH to 3000-20000 SCFM |
| Fittings | 1/4" - 3" NPT, 1/2" - 8" water |
| Material | Bronze, Monel or SS |
| Operating Temp Range Standard | -30 to 212 °F |
| Optional High Temp | -80 to 350 °F |
| Maximum Pressure Standard | 180 PSIG |
| Optional High Pressure | 400 PSIG |
| Mass Flow Measuring Ranges | 0.003-0.3 LBS/Min. through 220-2,400 LBS/Min. |
| Line Sizes 1/4" through 3" | 0.003-0.3 LBS/Min. through 220-2,400 LBS/Min. |
| Accuracy (Mass Flow) | ±0.1% of reading |
| Fittings | NPT, BSPP, SAE Thread; ANSI, DIN, JIS Flange. Others on request |
| Max. Pressure | To 13,000 PSIG |
| Max. Operating Temperature | Up to 500°F depending on model |
| Mass Flow Measuring Ranges | 0.7-7 LBS/Min to 200-2200 LBS/Min. |
| Accuracy (Mass Flow) | ±0.15% of reading typical |
| Fittings | ANSI CL 150/300 flange. Others on request |
| Max. Pressure | Per ANSI CL 150/300 |
| Max. operating temperature | Up to 570°F depending on model |
| Mass Flow Measuring Ranges | 2.2-22 LBS/Min. through 220-2200 Tons/Hr. |
| Line Sizes 1/4" through 10" standard, up to 16" on request | 2.2-22 LBS/Min. through 220-2200 Tons/Hr. |
| Accuracy (Mass Flow) | ±0.15% of reading or better |
| Fittings | NPT Thread, ANSI CL 150/300 flange. Others on request |
| Max. Pressure | to 580 PSIG standard, higher on request |
| Max. operating temperature | Up to 500°F depending on model |
| Measuring range | 0.62-5 to 25-300 GPM |
| Fitting | 1/4 NPT...2 NPT, wafer for 1/2"..3" Material; PVC, PVDF |
| Max. pressure | Varies w/ temperature up to 150 PSIG @ 70°F |
| Max. temperature | 140°F @ 50 PSIG |
| Accuracy | ± 1 % FS |
| Analog output |