Coriolis Mass Flow Meter and Switches
Coriolis mass flow meters measure the mass flow rate of fluid traveling through a vibrating tube, and measure density and temperature at the same time. The measurement is direct, highly accurate, and independent of fluid properties.
Because one device covers mass flow, density, and temperature, Coriolis meters simplify system design and reduce installation cost. They are used where precise control of material transfer matters; the trade-off is a higher initial cost than other flow technologies.
HPC
Compact Low Flow Coriolis Flow Meter
New Revolutionary Technology | Highest Accuracies for Low Flows | Superior Vibration Resistance | High Temperature Capacity | Up to 5,800 PSI
Mass Flow Measuring Ranges
2...20 kg/h to 5...50 kg/h
Connections
1/2" NPT Thread, Gyrolok, Swagelok
Accuracy (Liquid)
± 0.1% of Reading
Max. Operating Temperature
350 °F (180 °C)
Media Categories
Liquid or Gas
Rugged Anodized Aluminum Sensor Housing
Wall Mount or Desk-top Models Available
Precise Measurement for Low Flow Ranges
Available with Remote Mount Transmitter
Certifications/Approvals: ATEX, IECEx
TMU
High Performance Coriolis Flow Meter
High Flow Rates | Liquids, Gas, or Steam | Flow, Density, and Temperature Measurement | Precision Batching | High Accuracy | NPT or ANSI Connections | Exotic Materials
Mass Flow Measuring Ranges
2.2...22 Lb/Min. to 220...2200 Tons/Hr.
Line Size
¼"...10" Standard (to 16" Upon Request)
Accuracy
± 0.15% of Reading or Better
Fittings
NPT Thread, ANSI CL 150/300 Flange, Others Upon Request
Max. Pressure
580 PSIG Standard (Higher Upon Request)
Max. Operating Temperature
Up to 500 °F (260 °C) (Depending Upon Model)
Media Categories
Liquid, Gas, or Steam
Highest Flow Capability Available in the Industry
Wetted Materials Available Include 316L Stainless Steel, Hastelloy® C-22, Others on Request
Highly Immune to Piping Induced Measuring Errors Caused by Vibration
Simultaneous Mass Flow, Density, Temperature and Volume Flow Measurements
Highly Efficient Heating Jackets Optional
Certifications/Approvals: ATEX, IECEx, cCSAus
Sample Applications: Chemical and Petrochemical Industry, Food Industry, and Oil and Gas Industry
TMU-W
High Pressure Coriolis Flow Meter
Custom Design for Hydrogen Dispensation | Liquid, Gas, or Steam | Other High Pressure Applications | Several Certifications | NPT Fittings
Accuracy
Gas: ±0.5 % of actual flowrate ± ZP stability
Fittings
6MF 9/16-18 UNF, 1/2" NPT Thread, Hofer 7/8"
Max. Pressure
1000 bar (20 °C)
Max. Operating Temperature
-40 ... +100 °C (H2 dispensers -40 ... +55 °C)
Media Categories
Liquid, Gas, or Steam
Pressure Resistant to 1,000 bar
2 Current Output Signals 4-20 mA
Pulse or Frequency Output
Certifications/Approvals: ATEX, IECEx, IEC, OIML R139